Genuine Kenmore replacement parts for every appliance in your home are available right here at GenuineReplacementParts.com. Whether you need Kenmore washer parts, Kenmore dishwasher parts, Kenmore stove parts, or components for your refrigerator, dryer, or range, our catalog carries OEM-approved parts that fit your specific model perfectly. Every part ships directly from authorized sources so you get the correct component the first time, without the guesswork.

How to Find the Right Kenmore Part for Your Model

Finding the correct Kenmore replacement parts starts with your appliance's model number. This number is unique to your unit and tells you exactly which components are compatible. Here's where to look depending on the appliance:

• On the door frame or inside the door: Most Kenmore refrigerators and dishwashers have the model number printed on a sticker just inside the door or along the door frame.
• Near the control panel: Kenmore washers and dryers often carry the model label near the front control panel or inside the lid.
• On the back of the unit: Kenmore stoves, ranges, and some dryers display the model number on a metal plate attached to the rear of the appliance.
• Inside the appliance cabinet: For certain Kenmore washing machines, the sticker is placed inside the drum area or behind the access panel.

Once you have your model number, use our search tool to pull up compatible Kenmore parts instantly. No cross-referencing, no confusion.

Common Kenmore Appliance Replacement Parts

Certain Kenmore parts wear down faster than others and are among the most frequently replaced across all appliance types. Below are some of the most common components customers order:

• Kenmore Refrigerator Water Filter (replaces part numbers like LT700P and 9690): This carbon block filter removes chlorine, sediment, and other contaminants from your water and ice supply. It should be replaced every six months to maintain water quality and flow rate.
• Kenmore Washing Machine Suspension Rods (4-piece damper rod kit): These rods stabilize top-load washers during the spin cycle. If your Kenmore washing machine shakes violently or moves across the floor during spin, worn suspension rods are usually the cause. The kit typically installs in under 30 minutes.
• Kenmore Washer Lid Switch Assembly (WP3949238): This safety component prevents the washer from spinning when the lid is open. A failed lid switch is one of the most common reasons a Kenmore top-load washer stops spinning mid-cycle.
• Kenmore Dishwasher Upper Rack Adjuster (W10712395): This OEM adjuster keeps the upper dish rack sliding smoothly on both sides. When the adjuster breaks, the rack tilts or collapses, making the dishwasher unusable.
• Kenmore Dryer Heating Element: A failed heating element is the top reason Kenmore dryers stop producing heat. Replacing it restores normal drying times and prevents damage to clothes from extended tumbling.
• Kenmore Stove Igniter: If your Kenmore gas range clicks repeatedly but the burner won't light, or if your oven takes too long to reach temperature, a worn igniter is likely the culprit.
• Kenmore Range Burner Drip Pans and Coil Elements: These wear out from regular use and spills. Replacing them restores appearance and ensures even heat distribution across your cooktop.

Kenmore Parts by Appliance Type

Kenmore Washer Parts and Kenmore Washing Machine Parts

Kenmore washers are built to handle years of heavy use, but components like lid switches, pump filters, agitator dogs, drive belts, and suspension rods eventually wear out. Our inventory covers both top-load and front-load Kenmore washing machine parts, including drain pumps, door boot seals, control boards, and motor couplings. Having the right Kenmore washer part on hand means you can often complete a repair in an afternoon without needing a service call.

Kenmore Dishwasher Parts

From spray arms and door latches to control panels and circulation pumps, Kenmore dishwasher parts are among the most searched components in our catalog. Common issues like poor cleaning performance, water left at the bottom of the tub, or a door that won't latch are almost always fixable with a single replacement part. We carry both upper and lower rack hardware, silverware baskets, float switches, and fill valves for a wide range of Kenmore dishwasher models.

Kenmore Stove Parts and Kenmore Range Parts

Kenmore stove parts and Kenmore range parts cover everything from burner switches and infinite control valves to oven temperature sensors and bake elements. Whether you have a gas or electric range, surface burners and oven components are the most frequently replaced parts. A faulty oven igniter, burned-out bake element, or cracked surface burner can usually be replaced in under an hour with the right OEM part.

Kenmore Refrigerator Parts

Water filters, ice maker assemblies, door gaskets, defrost thermostats, and evaporator fan motors are the Kenmore refrigerator parts customers replace most often. If your fridge is not cooling properly, making unusual noises, or leaking water inside the cabinet, the fix usually comes down to one or two specific components. Replacing them with genuine OEM parts ensures the repair holds long-term.

Kenmore Dryer Parts

Kenmore dryer parts like heating elements, thermal fuses, drum belts, idler pulleys, and door switches handle the most mechanical stress of any appliance. A dryer that takes two cycles to dry a load, tumbles but produces no heat, or won't start at all almost always points to one of these components. Our catalog covers both electric and gas Kenmore dryer models.

OEM Kenmore Parts vs. Aftermarket Parts

Using genuine Kenmore replacement parts is the surest way to restore your appliance to its original performance and avoid a repeat repair down the road.

How to Install Kenmore Appliance Parts Safely

Replacing Kenmore parts at home is straightforward when you follow a few safety basics. Here is a simple process that applies to most Kenmore appliance repairs:

1. Disconnect Power and Water Before Starting

Unplug the appliance from the wall outlet or flip the dedicated circuit breaker before touching any internal components. For Kenmore dishwashers and refrigerators, also shut off the water supply line to avoid leaks during the repair.

2. Gather the Right Tools

Most Kenmore appliance part replacements require only basic hand tools: a Phillips-head and flat-head screwdriver, a nut driver set, and needle-nose pliers. Some repairs, like replacing a control board or testing a thermal fuse, also benefit from a multimeter to confirm the old part has actually failed.

3. Remove the Failed Part Carefully

Take note of how the original part is installed before removing it. For wiring harnesses and connectors, a quick photo with your phone before disconnecting anything can save you time during reassembly.

4. Install the New Part and Secure All Connections

Seat the new OEM part firmly, reconnect any wiring harnesses, and replace any mounting screws or clips. Make sure nothing is pinched or left loose before closing the appliance back up.

5. Restore Power and Test

Reconnect the power supply and run a short test cycle to confirm the repair worked. For Kenmore washers, run a spin-only cycle. For Kenmore dryers, run a timed dry cycle. For Kenmore dishwashers, run a short wash program and check for leaks.

Where to Buy Genuine Kenmore Parts

GenuineReplacementParts.com is your trusted source for OEM Kenmore replacement parts shipped quickly to your door. To find the correct part, have your appliance's model number ready. The model number is the most reliable way to confirm compatibility before you order, and it's typically found on a label inside the door, on the door frame, or on the back of the unit.

Why Shop With Us for Kenmore Parts?

• 100% Genuine OEM Parts: Every Kenmore part in our catalog comes from authorized sources, never imitations or knock-offs.
• Guaranteed Fit: Search by your appliance's model number and get parts confirmed to fit your exact unit. If something is not right, our return process is straightforward.
• Expert Support: Our team understands Kenmore appliances inside and out and can help you identify the correct part when you're not sure what to order.
• Fast Shipping: Most in-stock Kenmore parts ship the same day so your appliance is back up and running as quickly as possible.
• Manufacturer Warranty Coverage: All OEM Kenmore parts include the manufacturer's warranty, giving you protection if a part turns out to be defective.
• Easy Model Number Search: Enter your model number on our site and instantly see every compatible part for your specific Kenmore appliance.

How to Order the Correct Kenmore Replacement Part

1. Find your model number: Check inside the door, on the door frame, near the control panel, or on the back of the unit depending on your appliance type.
2. Search by model number: Enter the full model number into our search bar to see all compatible Kenmore parts for your appliance.
3. Confirm the part details: Review the part description, part number, and any included diagrams to make sure you are ordering exactly what you need.
4. Complete your order: Add the correct part to your cart and check out securely. Your genuine Kenmore replacement part will arrive ready to install.