Beko parts help repair Beko refrigerators, washing machines, dishwashers, ranges, ovens, dryers, and built-in kitchen appliances. At Genuine Replacement Parts, you can search by model number to find genuine OEM Beko spare parts that match the exact appliance you own.

Beko refrigerator parts, Beko washing machine parts, Beko fridge parts, dishwasher parts, oven parts, range parts, and laundry parts are model-specific. Door locks, drain pumps, filters, shelves, water valves, heating elements, control knobs, sensors, and gaskets should be ordered only after confirming the full model number.

This page is built to answer common repair questions before users order parts. It explains how to identify the right Beko part, what symptoms usually mean, which parts are commonly replaced, and when a repair should be handled by a technician.

How to Find the Right Beko Part for Your Model

The Beko model number is the key to correct part fit. Many Beko appliances share similar styling, but part dimensions, connectors, sensors, and mounting points can differ by series. Search by the full model number and part name to avoid ordering a part that looks similar but does not fit.

If the appliance is built into cabinetry, open the door or drawer and look around the inner frame first. If the label is not visible, check the user manual or product registration paperwork. For refrigerators and washers, a model label may also be found inside the cabinet or near the door opening.

• Refrigerators and freezers: inside the fresh-food compartment, on a side wall, or near drawers and shelves.
• Washing machines: inside the door frame, around the opening, or on the rear cabinet label.
• Dishwashers: along the inner door edge or tub frame.
• Ovens and ranges: around the door frame, lower drawer area, rear panel, or rating plate.
• Dryers: inside the door opening or on the rear panel.

Common Beko Replacement Parts List

Common Beko replacement parts include drain pumps, pump filters, door locks, door handles, door gaskets, water inlet valves, refrigerator shelves, crisper drawers, ice maker parts, water filters, dishwasher spray arms, dish racks, oven heating elements, control knobs, sensors, and dryer heating parts.

A Beko repair usually starts with a symptom like standing water, no drain, poor cooling, a locked washer door, no oven heat, a noisy dryer, or weak water flow. The right replacement part depends on both the symptom and the exact model.

Beko Dishwasher 

Beko washing machines and dishwashers depend on clear pump filters and working drain pumps. Standing water, slow draining, or a cycle that will not complete often starts with a clogged filter or blocked pump area.

Door Lock, Door Handle, and Door Gasket

Washer and dishwasher door parts control safe operation and water sealing. A door that will not lock, will not open, or leaks during a cycle may need the lock, latch, handle, or gasket inspected.

Beko Refrigerator Water FIlter 

Cooling and water-flow issues can involve the door gasket, evaporator fan, temperature sensor, water filter, water valve, or ice maker. Model matching is important because refrigerator interiors and water systems vary by model.

Beko Dishwasher Parts

Spray arms, rack rollers, filters, and seals help the dishwasher wash, drain, and close properly. Broken rack wheels or blocked spray arms can make a working dishwasher seem weak.

Beko Oven Parts

An oven that will not heat, overheats, or has broken control knobs may need a heating element, temperature sensor, control knob, or control-board component.

Beko Dryer Parts

Long dry times, no heat, or unusual noises can point to heating parts, sensors, drum rollers, belts, or airflow restrictions.

Common Problems and Solutions

Problem 1: Beko Washing Machine Will Not Drain

A Beko washing machine that stops with water inside, leaves clothes soaking wet, or stays near the end of the cycle often has a clogged pump filter, blocked drain hose, jammed pump impeller, or faulty drain pump. This issue is commonly reported on models such as the Beko WTL84151W, WTK72011W, and WMY series washers.

Likely parts to check: Pump filter, drain pump, drain hose, pump cover, pressure sensor, door lock.

Clean the pump filter first, because coins, buttons, lint, and small fabric pieces can block water flow. If the filter and hose are clear but the pump only hums or does not move water, replace the drain pump using the exact model number. Common replacement parts may include drain pump assemblies such as 2840940100 on compatible models. If water remains in the tub, the door may stay locked until the drain issue is corrected.

Problem 2: Beko Dishwasher Has Standing Water or Will Not Drain

A Beko dishwasher with standing water usually has debris in the filter, mesh screen, drain hose, pump area, or connected drain pipework. A failed drain pump can also prevent water from leaving the tub. This can occur on Dishwashers such as the Beko DUT25401XHW and DUT36520X series.

Likely parts to check: Dishwasher filter, drain pump, drain hose, check valve, spray arm, sump seal.

Remove standing water safely, clean the filter and mesh cover, and check the drain hose for kinks or blockages. If the pump makes noise but water remains, inspect the pump impeller. Components such as drain pumps and filter assemblies should always be matched to the exact dishwasher model before replacement.

Problem 3: Beko Washer Door Is Stuck or Will Not Lock

A washer door that will not open after a cycle can happen when water remains inside, the door lock is stuck, the handle is damaged, or the control does not release the lock.

Likely parts to check: Door lock, door handle, latch, drain pump, pump filter, control board.

Confirm the washer has drained fully before forcing the door. Clean the pump filter and run a drain cycle if possible. If the door handle is broken or the lock will not engage on the next cycle, replace the door lock or handle assembly using the exact model number. Parts such as door lock assembly 2805310400 are commonly used on select Beko front-load washers.

Problem 4: Beko Refrigerator or Fridge Section Is Not Cooling

A Beko refrigerator that is warm while the freezer still works may have blocked airflow, a failed evaporator fan, a damaged door gasket, frost buildup, a bad temperature sensor, or sealed-system trouble. This issue is commonly seen on Beko refrigerator models including BFFD3626SS and select BFBF series units.

Likely parts to check: Evaporator fan, temperature sensor, door gasket, defrost part, compressor start part, control board.

Check that the door seals fully, air vents are not blocked, and the coils and rear airflow area are clean. Replace a torn gasket if warm air is entering. If the fan does not run or the fridge stays warm after defrosting and cleaning, the fan motor, sensor, or control system may require replacement with model-specific parts.

Problem 5: Beko Oven Will Not Heat Properly

An oven that does not heat, heats slowly, or does not hold temperature may have a failed heating element, bad temperature sensor, damaged control knob, or control-board issue. Common affected models include the Beko SLGR30532SS ranges.

Likely parts to check: Bake element, broil element, oven sensor, control knob, thermostat, control board.

Confirm the oven has power and the correct cooking mode is selected. A visibly damaged element should be replaced with the exact model-matched component. Parts such as bake elements, oven sensors, and control knobs vary significantly between models, so verify compatibility before ordering.

Problem 6: Beko Dryer Takes Too Long to Dry or Has No Heat

A Beko dryer with long dry times, no heat, or damp clothes at the end of a cycle may have restricted airflow, a clogged filter, a faulty heating element, or a bad temperature sensor. This is a common complaint on models such as the Beko HPD24412W and DTGC8011W.

Likely parts to check: Lint filter, heating element, NTC sensor, thermostat, belt, drum roller, blower part.

Clean the lint filter and vent path before replacing heating parts. If airflow is clear and the dryer still does not heat, inspect the heating element, NTC sensor, and thermostat. Replace worn belts or drum rollers if the drum movement is noisy or uneven. Always use the full model number when selecting replacement dryer components.

What Beko Parts Require a Technician

Many visible Beko parts such as filters, shelves, racks, rollers, knobs, handles, water filters, and some gaskets can be replaced by a careful user. Pump filters and simple drain-path cleaning are also practical maintenance tasks when the appliance is unplugged and water is controlled.

A technician should handle repairs involving live voltage, gas components, sealed refrigeration systems, control boards, internal wiring, oven heating circuits, or repeated leak faults. If an appliance trips the breaker, smells burnt, leaks from an unknown source, or will not reset after basic checks, professional diagnosis is the safer option.

Safety Check Before Ordering Parts

1. Disconnect power before replacing any Beko part.
2. Turn off water before replacing inlet valves, drain pumps, hoses, or refrigerator water parts.
3. Have towels or a shallow tray ready before opening a washer pump filter.
4. Never force a locked washer door if water remains inside.
5. Use the full model number when ordering Beko spare parts.
6. Use a technician for gas, high-voltage, or sealed refrigeration repairs.

How Genuine OEM Parts Compare to Aftermarket Alternatives

How to Order Beko Parts from Genuine Replacement Parts

1. Locate the full Beko model number on the appliance rating label.
2. Search the model number or part name on Genuine Replacement Parts.
3. Review the product listing for fit notes, part images, and specifications.
4. Match the old part to the new part by connector, size, shape, and function.
5. Install the part safely or schedule a technician if the repair involves internal electrical, gas, or sealed-system work.

Why Choose Genuine Replacement Parts for Beko Parts

• Genuine Replacement Parts helps users find Beko parts by appliance type and model number.
• Genuine OEM parts support correct fit and original performance.
• The collection covers Beko refrigerator parts, washing machine parts, fridge parts, dishwasher parts, oven parts, and dryer parts.
• Repair-focused descriptions help users connect common problems with likely replacement parts.
• Fast, focused part lookup helps reduce downtime for everyday home appliances.