The Frigidaire FRFS2823AS is a 27.8 cu. ft. standard-depth French door refrigerator. It is one of the more popular refrigerator models in the Frigidaire lineup, known for its EvenTemp cooling system, spacious interior, and stainless steel finish. Like most modern refrigerators, it does not use a traditional screw-in incandescent bulb inside the fresh food compartment. Instead, it uses an LED lighting system, which is more energy efficient and lasts significantly longer than older bulb types.

Because the FRFS2823AS is a high-volume model, its LED light components are widely available, and replacement is a common request from owners once the unit passes the two- to three-year mark.

How the LED Light Bulb and Module Work in This Refrigerator

The Frigidaire FRFS2823AS uses one of two lighting designs depending on the production run and interior layout:

• A screw-in LED bulb, which looks similar to a traditional bulb but uses LED technology internally. This type twists in and out of a standard light socket, just like older halogen or incandescent bulbs.

• An LED light bar or light module, which is a strip or panel of LED lights wired directly into the refrigerator’s control system. This type is mounted along the top or side wall of the fresh food compartment and connects with a small wiring harness instead of a screw-in base.

In both designs, the light is triggered by a door switch. When you open the refrigerator door, the switch closes a circuit that sends low-voltage power to the LED bulb or module. When you close the door, the switch opens the circuit and the light turns off. This is why a failed door switch can sometimes look identical to a failed light bulb, even though they are two different parts.

The LED components themselves run on low-voltage DC power, which is converted from the refrigerator’s standard household AC power through a small internal driver. This is different from older incandescent bulbs, which ran on standard household voltage directly.

What Happens When the Light Bulb or Module Stops Working

When the LED light bulb or module fails, you will typically notice one or more of the following:

• The refrigerator interior stays completely dark when you open the door

• The light flickers before going out completely

• The light works on one side of the fridge but not the other, if your model has multiple light locations

• The light appears dim or has a noticeably different color tone before failing

• The light turns on but does not turn off when the door is closed

It is important to understand that a failed interior light does not affect the cooling performance of the refrigerator. Many owners worry that a dark interior means the fridge has stopped cooling, but the compressor, evaporator fan, and cooling system operate on a completely separate circuit from the lighting system. If your food is still cold but the light is out, this is almost always a lighting component issue and not a cooling issue.

Common Causes of a Frigidaire FRFS2823AS Light Not Working

1. Burned Out or Failed LED Bulb or Module

LED components last far longer than incandescent bulbs, often five to ten years, but they do eventually fail, especially if the refrigerator door is opened and closed frequently throughout the day.

2. Faulty Door Switch

The door switch is a small button-style switch located near the door hinge or door frame that detects when the door is open. If this switch sticks or fails, the light will not receive power even if the bulb itself is still good.

3. Loose or Disconnected Wiring Harness

On models using the LED light bar or module design, the light connects to the refrigerator’s wiring through a small plug-in harness. Vibration over time, or a recent move or delivery, can sometimes loosen this connection.

4. Blown Thermal Fuse or Control Board Issue

In rare cases, an electrical issue elsewhere in the refrigerator, such as a blown thermal fuse or a failing main control board, can cut power to the lighting circuit. This is less common but should be considered if replacing the bulb or module does not solve the problem.

5. Power Supply Interruption

A recent power outage or the refrigerator being unplugged and replugged can occasionally reset or trip an internal safety circuit. Unplugging the refrigerator for 60 seconds and plugging it back in can help rule this out before replacing any parts.

How to Replace the LED Light Bulb or Module on the FRFS2823AS

Safety First

Always unplug the refrigerator before working on any internal component. Do not attempt this repair with the unit still connected to power.

Step-by-Step Instructions

1. Unplug the refrigerator from the wall outlet.

2. Open the refrigerator door and locate the light cover, usually along the top interior wall or upper side wall of the fresh food compartment.

3. Gently press the tabs on the sides of the light cover, or use a flat trim tool if the cover is snapped in tightly, and remove the cover to expose the bulb or module.

4. If your model uses a screw-in LED bulb, turn it counterclockwise to remove it, just like a standard light bulb.

5. If your model uses an LED light bar or module, unclip the wiring harness connector, then release the mounting clips holding the module in place.

6. Compare the old part to the new replacement part to confirm it matches before installing.

7. Install the new bulb by turning it clockwise until snug, or reconnect the wiring harness and snap the new module back into its mounting bracket.

8. Replace the light cover.

9. Plug the refrigerator back in and open the door to confirm the light turns on.

Most owners complete this repair in five to ten minutes with no tools required for the screw-in bulb version, or with a basic flathead screwdriver or trim tool for the module version.