Lint Screen Housing Seal (36 in) for Hotpoint NBXR453GV1AA Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NBXR453GV1AA.
Lint Trap Duct Assembly for Hotpoint NBXR453GV1AA Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NBXR453GV1AA. . Does NOT include moisture sensor bars, includes felt drum seal, blower seal, wires, wire connector, and wire tie.
2-Coil Gas Shut-Off Valve Assembly for Hotpoint NBXR453GV1AA Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NBXR453GV1AA.
Drum Bearing Slide/Glide/Pad for Hotpoint NBXR453GV1AA Dryer. Genuine product manufactured by Hotpoint.
Note: There are two of these needed on your dryer. These go on the inner most slots on the front bearing. Sold individually will need to purchase two. The drum slides support the front of the dryer drum instead of rollers or bearings. As they wear out the dryer will make more noise.
Conversion Kit - LP to Natural Gas for Hotpoint NBXR453GV1AA Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NBXR453GV1AA.
Front Drum Bearing Slide (White) for Hotpoint NBXR453GV1AA Dryer. Genuine product manufactured by Hotpoint.
Note: The dryer's drum slides help to support the front of the drum as it rotates. If the drum slides are worn out, the dryer will be noisy. It is recommended replacing all of the slides together.
Drive Motor Assembly for Hotpoint NBXR453GV1AA Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NBXR453GV1AA. Replaces old "T" & "V" style motors.
LP to Gas Conversion Kit for Hotpoint NBXR453GV1AA Dryer. Genuine product manufactured by Hotpoint. This liquid propane (LP) conversion kit is for dryers.
It converts a natural gas dryer to operate on liquid propane.
A qualified technician should install this LP conversion kit because of the risk of explosion or fire if the kit is installed incorrectly.
Idler Arm for Hotpoint NBXR453GV1AA Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NBXR453GV1AA. This idler pulley arm is for dryers.
It holds the idler pulley.
Unplug the dryer before installing this part. Wear work gloves to protect your hands.
Diffuser for Hotpoint NBXR453GV1AA Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NBXR453GV1AA. This diffuser is for dryers.
It covers the back of the dryer drum and houses the rear drum supports and/or rear bearing. Smooth side faces the interior of the dryer.
Unplug the dryer before installing this part. Wear work gloves to protect your hands.
Cap Nut for Hotpoint NBXR453GV1AA Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NBXR453GV1AA. This cap nut is for dryers.
Follow appropriate safety practices when installing this cap nut.
Leveling Leg and Bracket Assembly (Rear) for Hotpoint NBXR453GV1AA Dryer. Genuine Product, GE manufactured the original product for your Hotpoint NBXR453GV1AA. This leveling leg and bracket is for dryers.
It attaches to the dryer base to support and level the dryer.
Wear work gloves to protect your hands when installing this part.
