GE PFDN445EL0MV Blower Wheel - Genuine OEM

Trap Duct/Lint Trap (Complete Assembly) for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Lint Trap Felt/Seal Kit for GE PFDN445EL0MV Dryer.

Drum Bearing Slide/Glide/Pad for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

 

Note: There are two of these needed on your dryer. These go on the inner most slots on the front bearing. Sold individually will need to purchase two. The drum slides support the front of the dryer drum instead of rollers or bearings. As they wear out the dryer will make more noise.

Thermostat High-Limit for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Dryer Drive Belt for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Mica Heater and Housing Assembly for GE PFDN445EL0MV Dryer.

Door Hinge Assembly for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Door Striker Clip for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Front Drum Bearing Slide (White) for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

 

Note: The dryer's drum slides help to support the front of the drum as it rotates. If the drum slides are worn out, the dryer will be noisy. It is recommended replacing all of the slides together.

Leveling Leg-Screw (gray) for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Lamp/Light Bulb -10W for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Door Switch for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Door Latch for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Outlet Control Thermistor for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Cycling Thermostat for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Sensor Rod for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Rear Drum Bearing Sleeve for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Retainer O-Ring for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Idler Pulley for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Motor and Pulley Assembly for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Control Knob Assembly (Stainless) for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

User Interface Control Board for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Inlet Control Thermistor for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Diffuser for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE. This diffuser is for dryers.

It covers the back of the dryer drum and houses the rear drum supports and/or rear bearing. Smooth side faces the interior of the dryer.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Cap Nut for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE. This cap nut is for dryers.

Follow appropriate safety practices when installing this cap nut.

Leveling Leg and Bracket Assembly (Rear) for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE. This leveling leg and bracket is for dryers.

It attaches to the dryer base to support and level the dryer.

Wear work gloves to protect your hands when installing this part.

Terminal Block and Grounding Strap for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE. This terminal block and grounding strap is for dryers.

It connects the house electrical power to the dryer wiring harness.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Retainer Clip for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE. This retainer clip is for dryers.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Blower Motor Clamp for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Rear Level Leg Bracket for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Phillips Square Screw for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Phillips Screw for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Shaft And Bracket Assembly for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Screw for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Top Bearing Felt for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Strike Plate for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Screw for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Filter Assembly for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Terminal Block Cover for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Strain Relief Bracket for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Screw Pack for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

Screw for GE PFDN445EL0MV Dryer. Genuine product manufactured by GE.

The GE PFDN445EL0MV Door Gasket is needed when repairing your GE appliance and PFDN445EL0MV is a genuine OEM (Original Equipment Manufacturer) part from GE. Eventually parts can wear out on your GE appliance, when that happens trust Genuine Replacement Parts to have the GE replacement part you need to fix your appliance. We are one of the top online options for GE replacement parts and repair. If you have the model number or part number of your appliance that is different than what is being shown, please enter it at the top search bar for best results. This GE requires part PFDN445EL0MV when fixing your appliance. Follow the instructions in the owner's manual to install the part.