GE DCVH680EJ2MR User Interface Control Board - Genuine OEM

Main Power Board Assembly for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Trap Duct/Lint Trap (Complete Assembly) for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Mica Heater/Heating Element for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Mica Heater and Housing Assembly for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Drum Drive Belt for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Top Drum Support Bearing for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Leveling Foot for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Rear Drum Bearing Kit for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Drum Bearing Slide/Glide/Pad for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

 

Note: There are two of these needed on your dryer. These go on the inner most slots on the front bearing. Sold individually will need to purchase two. The drum slides support the front of the dryer drum instead of rollers or bearings. As they wear out the dryer will make more noise.

Thermostat High-Limit for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Dryer Lint Liter Assembly for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Knob and Insert Assembly for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Door Striker Clip for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Front Drum Bearing Slide (White) for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

 

Note: The dryer's drum slides help to support the front of the drum as it rotates. If the drum slides are worn out, the dryer will be noisy. It is recommended replacing all of the slides together.

Felt for Trap Duct for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE. Note: Part# WE09X20441 has been discontinued by the manufacturer. A substitution may be shipped in lieu of this product. The substitution may have a different design, but it will still be compatible with the same appliance models as the original part. It is not uncommon for manufacturers to discontinue parts and create substitutions. While the original part(s) and their substitution(s) may vary in appearance, they possess the same functionality. Please verify that your appliance model is compatible with this part before finalizing your order. GRP is not responsible for incorrect parts ordered.

Lamp/Light Bulb -10W for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Door Switch for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Door Latch for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Interlock Door Switch for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Drum Assembly for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

High-Limit Safety Thermostat for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE. High limit thermostat, L210.

Cycling Thermostat for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Sensor Rod for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Rear Drum Bearing Sleeve for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Retainer O-Ring for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Motor and Pulley Kit for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

The GE DCVH680EJ2MR Door Gasket Seal is needed when repairing your GE appliance and DCVH680EJ2MR is a genuine OEM (Original Equipment Manufacturer) part from GE. Eventually parts can wear out on your GE appliance, when that happens trust Genuine Replacement Parts to have the GE replacement part you need to fix your appliance. We are one of the top online options for GE replacement parts and repair. If you have the model number or part number of your appliance that is different than what is being shown, please enter it at the top search bar for best results. This GE requires part DCVH680EJ2MR when fixing your appliance. Follow the instructions in the owner's manual to install the part.

Door Assembly (Chrome) for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Control Panel Assembly (Red) for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Top Panel (White) for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Idler Pulley (Yellow) for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Rear Body Panel (White) for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Inlet Control Thermistor for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Blower Wheel w/insert for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE. This dryer blower wheel is for laundry centers.

It attaches to the dryer drive motor shaft. It blows air through the drum and out the exhaust vent.

Unplug the laundry center before installing this part. Wear work gloves to protect your hands.

Idler Arm for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE. This idler pulley arm  is for dryers.
It holds the idler pulley.
Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Dryer Thermistor for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE. This thermistor is for dryers.

It attaches on the blower housing, and monitors and helps regulate the temperature inside the dryer.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Diffuser for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE. This diffuser is for dryers.

It covers the back of the dryer drum and houses the rear drum supports and/or rear bearing. Smooth side faces the interior of the dryer.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Felt Trap Duct Seal for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE. This drum felt seal is for dryers.

It allows the drum to glide smoothly on the front panel.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Cap Nut for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE. This cap nut is for dryers.

Follow appropriate safety practices when installing this cap nut.

Leveling Leg and Bracket Assembly for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE. This leveling leg and bracket is for dryers.

It attaches to the dryer base to support and level the dryer.

Wear work gloves to protect your hands when installing this part.

Terminal Block and Grounding Strap for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE. This terminal block and grounding strap is for dryers.

It connects the house electrical power to the dryer wiring harness.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Retainer Clip for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE. This retainer clip is for dryers.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Drum Baffle for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Screw for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Top Bearing Felt for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Strike Plate for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Retainer Bearing for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Screw for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Terminal Block Cover for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Strain Relief Bracket for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Screw Pack for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.

Screw for GE DCVH680EJ2MR Dryer. Genuine product manufactured by GE.